想要縮短《Chinese Journal of Chemical Engineering》雜志的審稿周期需要作者、編輯部和審稿人等多方面的共同努力，作者可以采取一些有效措施，間接地加快審稿進度，提升稿件的處理效率。

建議如下：

一、提高論文質量

（1）嚴格遵循投稿要求：在投稿前，仔細閱讀《Chinese Journal of Chemical Engineering》雜志的投稿指南，包括格式要求、字?jǐn)?shù)限制、參考文獻格式等。確保稿件符合雜志的規范，避免因格式問題被退回修改，從而耽誤時間。

（2）提高論文質量：確保論文的研究?jī)?nèi)容具有創新性和學術價值，數據準確，論證嚴謹，語言表達清晰流暢。高質量的稿件更容易通過初審，進入同行評審階段。

二、選擇合適的投稿時機

（1）關注期刊審稿周期：在投稿前，了解《Chinese Journal of Chemical Engineering》雜志的審稿周期（預計1-3個月）和發表周期（月刊），以便合理安排投稿時間。

（2）關注期刊動態：了解期刊的專題征稿或熱點話題，針對性地投稿，可能獲得優先處理。

三、與編輯部保持良好溝通

（1）主動了解審稿進度：如果超過預計的審稿時間仍未收到回復，可以禮貌地向編輯部發送郵件，詢問稿件的審稿進度。

（2）尊重審稿意見：認真對待審稿意見，積極修改論文中的不足之處，共同探討論文的改進方向。

需要注意的是，縮短審稿周期的前提是保證稿件的質量，不能為了追求速度而犧牲學術嚴謹性。

《Chinese Journal of Chemical Engineering》雜志創刊于1982年，是由中國科協主管、中國化工學會主辦的學術理論月刊。國內刊號CN：11-3270/TQ，國際刊號ISSN：1004-9541。該雜志以推動化學改革與發展、探索化學規律為宗旨，致力于為化學工作者、研究者和管理者提供一個學術交流的平臺。

《Chinese Journal of Chemical Engineering》雜志投稿建議：

Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.

? Author names and affiliations. Please clearly indicate the given name(s) and family name(s) of each author and check that all names are accurately spelled. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.

? Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that the e-mail address is given and that contact details are kept up to date by the corresponding author.

? Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.

Abstract 

A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.

Graphical Abstract 

A Graphical abstract is optional and should summarize the contents of the article in a concise, pictorial form designed to capture the attention of a wide readership online. Authors must provide images that clearly represent the work described in the article. Graphical abstracts should be submitted as a separate file in the online submission system. Image size: Please provide an image with a minimum of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable at a size of 5 ×13 cm using a regular screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office files. 

Highlights 

Highlights are mandatory for this journal. They consist of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including spaces, per bullet point). 

Keywords 

Authors are invited to submit a maximum of 6 keywords associated with their paper, using British or American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes. At least 3 of these keywords should be chosen from the list of recommended keywords.

Abbreviations 

Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.

Acknowledgements 

Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).

Formatting of funding sources 

List funding sources in this standard way to facilitate compliance to funder's requirements:

Funding: This work was supported by the National Institutes of Health [grant numbers xxxx, yyyy]; the Bill & Melinda Gates Foundation, Seattle, WA [grant number zzzz]; and the United States Institutes of Peace [grant number aaaa].

It is not necessary to include detailed descriptions on the program or type of grants and awards. When funding is from a block grant or other resources available to a university, college, or other research institution, submit the name of the institute or organization that provided the funding.

If no funding has been provided for the research, please include the following sentence:

This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.

Nomenclature and units 

Follow internationally accepted rules and conventions: use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI. Prohibit the use of the following non-SI units, e.g. M, ppm, bar, atm, ?, cal, et al. Authors wishing to present a table of nomenclature should do so on the second page of their manuscript.

Math formulae 

Please submit math equations as editable text and not as images. Present simple formulae in line with normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the text).

Footnotes 

Footnotes should be used sparingly. Number them consecutively throughout the article. Many word processors can build footnotes into the text, and this feature may be used. Otherwise, please indicate the position of footnotes in the text and list the footnotes themselves separately at the end of the article. 

Reference Style 

References should be numbered in the order of appearance. The following are examples of different types of references.

(1) S.M. Kresta, Characterization, measurement and prediction of the turbulent flow in stirred tanks, Ph. D. Thesis,McMaster Univ., Canada?1991.

(2) Q.Yu, J.T. Matheickal, P. Yin, P. Kaewsarn, Heavy metal uptake capacities of biomass: A comparison,Proceedings of Chemeca'98, Port Douglas, Australia, 1998.

(3) J.X. Xu, A survey on iterative learning control for nonlinear systems, Int. J. Control, 84 (7) (2001)1275-1294.

(4) T. Brawn, Extraction Chromatography, Elsevier, Amsterdam?1975.

(5) S. Osaki, Multistage vortex pump, Japan Pat., 62186095 (1986).

聲明：以上內容來源于互聯網公開資料，如有不準確之處，請聯系我們進行修改。