想要縮短《Journal of Systems Science and Systems Engineering》雜志的審稿周期需要作者、編輯部和審稿人等多方面的共同努力，作者可以采取一些有效措施，間接地加快審稿進度，提升稿件的處理效率。

建議如下：

一、提高論文質量

（1）嚴格遵循投稿要求：在投稿前，仔細閱讀《Journal of Systems Science and Systems Engineering》雜志的投稿指南，包括格式要求、字?jǐn)?shù)限制、參考文獻格式等。確保稿件符合雜志的規范，避免因格式問題被退回修改，從而耽誤時間。

（2）提高論文質量：確保論文的研究?jī)?nèi)容具有創新性和學術價值，數據準確，論證嚴謹，語言表達清晰流暢。高質量的稿件更容易通過初審，進入同行評審階段。

二、選擇合適的投稿時機

（1）關注期刊審稿周期：在投稿前，了解《Journal of Systems Science and Systems Engineering》雜志的審稿周期（預計1-3個月）和發表周期（季刊），以便合理安排投稿時間。

（2）關注期刊動態：了解期刊的專題征稿或熱點話題，針對性地投稿，可能獲得優先處理。

三、與編輯部保持良好溝通

（1）主動了解審稿進度：如果超過預計的審稿時間仍未收到回復，可以禮貌地向編輯部發送郵件，詢問稿件的審稿進度。

（2）尊重審稿意見：認真對待審稿意見，積極修改論文中的不足之處，共同探討論文的改進方向。

需要注意的是，縮短審稿周期的前提是保證稿件的質量，不能為了追求速度而犧牲學術嚴謹性。

《Journal of Systems Science and Systems Engineering》雜志創刊于1992年，是由中國科學技術協會主管、中國系統工程學會主辦的學術理論季刊。國內刊號CN：11-2983/N，國際刊號ISSN：1004-3756。該雜志以推動科學改革與發展、探索科學規律為宗旨，致力于為科學工作者、研究者和管理者提供一個學術交流的平臺。

《Journal of Systems Science and Systems Engineering》雜志投稿建議：

A. Manuscript style

1) Typed on single-sided A4 or 8 x 11 inch good quality white paper, single-spaced, 10-point font,and one-inch margins on all four sides, including the reference section.

2) The text should be carefully checked for typing errors, English grammar, spelling, and punctuation, etc.

3) Please provide a title of up to 70 characters, the names and affiliations of all authors, an abstract summarizing the manuscript in 100 to 250 words, followed by no more than six keywords for indexing purposes.

4) The length of the manuscript should not exceed 20 typed, single-spaced pages including figures,tables, references and appendices.

5) Citations in the text should be identified as follows: (Author(s), Year)

6) References should appear in a separate section at the end of the manuscript and should only include works cited in the text and that have been published or accepted for publication.

References must be complete, accurate, and listed in the following style:

Example for papers: Cachon, G.P. & Zipkin, P.H. (1999). Competitive and cooperative inventory

policies in a two-stage supply chain. Management Science, 45(7): 936-953

Example for books: Sage, A.P. (1992). Systems Engineering. New York: John Wiley & Sons, Inc.

B.Figures, charts, diagrams, tables and illustrations

1) Originals of all figures, charts, diagrams, tables and illustrations should be in good quality,sharp, noise-free, and easy-to-read.

2) Figures, charts, diagrams, tables and illustrations should be numbered consecutively using Roman numerals with a brief figure legend and labeled axes.

C. Further information

1) The editorial office will acknowledge receipt of manuscripts submitted by email.

2) Each manuscript submitted is subjected to a blind peer-review procedure. The decision to publish will then be based on the reviewers’ comments. Reviews take approximately 10 to 12 weeks to obtain. Please calculate an additional several months for the publication processes.

聲明：以上內容來源于互聯網公開資料，如有不準確之處，請聯系我們進行修改。